The top runs at an angle with the roof, so you use the space right into the point. The shelves get shorter toward the low side.
What makes this design special
Uses the model’s slope feature: a tall side, a short side and a sloped top. The cut list draws out the angled cut.
Dimensions
- Width 47 1/4″
- Height 59 1/16″
- Depth 15 3/4″
- 11/16″ plywood
- Tall side 59 1/16″
- Short side 29 1/2″
Panel sizes (cut list)
| Part | Size | Qty | Material | Thickness |
|---|---|---|---|---|
| Tall side | 59 1/16 × 15 3/4″ | 1 | Plywood (birch) | 11/16″ |
| Short side | 29 1/2 × 15 3/4″ | 1 | Plywood (birch) | 11/16″ |
| Bottom | 45 13/16 × 15 3/4″ | 1 | Plywood (birch) | 11/16″ |
| Sloped top | 45 1/16 × 15 3/4″ | 1 | Plywood (birch) | 11/16″ |
| Top (straight section) | 11 13/16 × 15 3/4″ | 1 | Plywood (birch) | 11/16″ |
| Back panel | 47 1/4 × 59 1/16″ | 1 | Plywood (birch) | 1/4″ |
| Adjustable shelf | 28 7/16 × 15 1/2″ | 1 | Plywood (birch) | 11/16″ |
| Adjustable shelf | 45 1/4 × 15 1/2″ | 1 | Plywood (birch) | 11/16″ |
| Adjustable shelf | 45 11/16 × 15 1/2″ | 1 | Plywood (birch) | 11/16″ |
These are the cut sizes the cabinet designer computes (edge banding and kerf included). For drawers and doors, always check the clearance your own slides and hinges need.
Open this project in the cabinet designer with the button below. You see the cabinet in 2D right away and can change the sizes, material and layout parametrically; the panel sizes and the cutting plan follow along. Rather save it yourself? Download the project file and open it via Open › Load project.
Material and sheets needed
Based on the panel sizes above, this project takes about 2 sheets of 3/4 in (18 mm) plywood and 1 sheet of 1/4 in (6 mm) plywood (back panel). Prices vary by country and store, so check your local supplier; the tool works out the exact number of sheets and can show real prices from its material library.
Make it your own
Every size here is a starting point. For more background, read the guide on a cabinet under a sloped roof.